×

MODULO: The Cable Industry Challenge - Speed, Capacity, Optimization, and DOCSIS 3.1

FRIEDBERG, Germany, June 03, 2016 (GLOBE NEWSWIRE) -- It is critical for Cable Operators to significantly increase the efficiency and capacity of their existing HFC (hybrid fiber-coax) networks in order to support the growing bandwidth demands for broadband services. Existing HFC infrastructure must be upgraded – by optimizing the network. Complete and extensive overbuilds are not a viable option. Not only must existing networks be upgraded in order to enable the economical expansion of broadband services, it must be done seamlessly without disrupting existing infrastructure. This requires high quality building blocks and components that reduce complexity, in order to meet the growing demand for bandwidth optimization related to the roll out of the DOCSIS 3.1 standard.





DEV Systemtechnik, a Quintech Company, will showcase its advanced technology for HFC Networks at ANGACOM 2016 in Cologne Germany. MODULO is the next generation solution consisting of universal, space saving active and passive components for RF transmission, for both upstream and downstream applications. Collectively, the company draws on over two decades of field-proven cable plant infrastructure technology experience, and its position as a primary supplier of components for installing and upgrading legacy and greenfield HFC cable networks. MODULO raises the bar in quality and performance for these network applications and upgrades, and fully supports the DOCSIS 3.1 transmission standard.

  • Universal: a single module, either a Splitter with monitoring port, or a Combiner with monitoring port, provides a 50% reduction in RU footprint
  • Smart: Designed and engineered to meet customer needs and network configuration challenges. All modules are designed with equalizers, amplifiers (gain and slope), redundancy switches, optical receivers and transmitters and RF modules for E/O transmission. Integration into a Monitoring & Control System allows for real-time observation of RF signals
  • Easy: All modules have been designed with operator functionality in mind, regardless of customer network variations and requirements, all in a single MODULO chassis


Visit DEV at ANGACOM 2016, Stand O.28, Hall 10.1, for an introduction to MODULO.

About Quintech Electronics and DEV Systemtechnik:
DEV Systemtechnik (www.dev-systemtechnik.com), a Quintech Company, develops and produces a complete range of leading edge, high-performance products and systems for the optical and electrical transmission of Radio Frequency (RF) signals in HFC cable head-ends and for satellite and broadcast applications. Collectively, the company draws on over two decades of field-proven cable plant infrastructure technology experience designing and upgrading cable head-ends to support tomorrow’s infrastructural requirements with product solutions for Up- and Downstream transmission. All products are designed and built to meet the highest standards of system availability, reliability and controllability.

Contact: DEV Systemtechnik GmbH & Co. KG Ute Chandoni-Goebel (uchandoni@dev-systemtechnik.com) www.dev-systemtechnik.com Quintech Electronics Dan Freyer, dan@adwavez.com www.quintechelectronics.com

Source: DEV Systemtechnik, aQuintech Company